Mazda CX-5 tuning accessories and accessories enhance the look and protection of your vehicle. According to the statistics of large auto body repair shops, most calls are related to collisions at speeds up to 10 km per hour. Most often, such collisions occur due to an incorrect assessment of the height of an obstacle, an incorrect determination of the distance to it, and errors in choosing the trajectory of movement or turn. Despite the fact that during such collisions the damage affects only the hinged elements of the body and does not affect the handling of the car, the appearance of the car deteriorates, and its value drops sharply. Therefore, caring owners of the Mazda CX-5 2011-2015 install accessories and tuning on their car.
You can buy tuning and accessories for Mazda CX 5 made at a Russian company from us. Due to the fact that the parts are made of stainless steel, aluminum and plastic, they have good strength and withstand high loads. Compared to the body kit made of chrome and nickel-plated steel, they have a very significant advantage: they do not rust even after the appearance of scratches and dents. The workmanship, including the conformity of the shape, size and location of the mounting holes, is at a very high level. Therefore, no adjustment is required during the installation of accessories.
Changes to factory cars can be divided into 2 main types: useful tuning and styling. In the ObvesMag online market, we suggest you buy accessories for the Mazda CX-5 2012-2014, this will make your car as comfortable as possible. All car owners will be pleased not so much to stand out in the stream as to install improvements that are useful to use. Choose tuning from leading Russian and foreign manufacturers, and your soul will enjoy the unique and bright appearance of your car every day.
In Russia, a considerable variety of goods for tuning the Mazda CX-5 2013 is produced, and our customers constantly ask: what to look for first? Our store is ready to recommend, first of all, to pay attention to the fact without which the use of modern vehicles will not be very convenient and safe. In the interior of your car, you need to order floor mats, this will help prevent dampness and moisture penetration. In the car, not only is there a risk of rust, but wiring damage is real, which is even worse.
The next type of useful change is the purchase of window and hood deflectors. Such tuning will protect the Mazda CX-5 from wind and stones. In our store there are many deflectors of all shapes and types. For example, deflectors with chrome moldings: such accessories have an excellent appearance.
Body kit installation in Moscow
The main type of Mazda CX-5 tuning, which our online store is famous for, is the implementation of a steel body kit and aluminum sills. Car footrests will help with landing and make the use of crossovers more comfortable. Without steps, it can be impossible for small children and disabled people not to stain clothes and shoes, it is more convenient to clean the roof from snow or attach a luggage box with them.
A practical body kit made of stainless steel allows you to protect the bumpers and fenders of the car from contact with neighbors in the parking lot and from other damage. Various small collisions will pass you by thanks to reliable assembly and thick steel. Such tuning for the CX-5 is highly recommended in off-road conditions or in the cramped conditions of a large city with a huge number of cars.
In our store, we have collected a huge number of accessories for tuning the interior and exterior of the car. Various trims on the radiator grilles, and hood stops. Any such accessory will make the appearance of your car more solid and dynamic. You have the opportunity to deliver all our goods and tuning yourself or in our car service any day. When we bring our goods in Moscow by courier or throughout Russia by a transport company: it is short and reliable.
The car "Mazda CX-5" attracts attention at first sight. This incredible machine has smooth curved front fenders and large wheel arches that give it a distinctive look. To complement and improve the appearance of the crossover, motorists do tuning. "Mazda CX-5" is an innovative model that allows the driver to feel complete control over the road.
Improvement of the braking system
Any refinement of the vehicle should begin with the replacement of the brakes, and the Mazda CX-5 crossover is no exception. This tuning allows you to quickly stop the car, which is especially important in emergency situations. The owners of this machine need to constantly check the condition of the brake pads and discs. When it comes time to replace them, it is better to buy components with good characteristics. If you have an active driving style, then you should install sports brakes: pads with improved composition, multi-piston calipers and lightweight brake discs.
Changing engine characteristics
To improve the technical performance of the Mazda CX-5, the owners resort to chip tuning. This safe and economical method involves tuning the operation of the vehicle's electronic control unit. Changes in the program, if desired, can be returned to the factory settings, if the chip tuning has not exceeded expectations. "Mazda CX-5", thanks to the flashing of the control unit, gets more horsepower and improved power characteristics of the engine.
How is chip tuning done?
Work of this kind is carried out in different ways. It is usually about:
- installation of an auxiliary utility for the ECU (electronic control unit);
- controller firmware update;
- using a booster, which provides the possibility of improving the power and strength indicators on the Mazda CX-5 car.
Chip tuning reviews have both positive and negative. After all, the official versions of the program for the electronic control unit can only correct the operation of some sensors, rather than improve the functioning of the mechanical part of the machine. It is better to use firmware developed by third-party companies. This method is very simple, all you need is a computer, an adapter to the control unit and a new version of the software.
But the most effective and fastest way is to install a booster. This is chip tuning. "Mazda CX-5" 2.0 liters with such an electronic device becomes more nimble and obedient. Place this device between the electronic control unit and the accelerator to change the settings of the parameters of each range, which are sent from the gas pedal. After installing the booster on the car, the operation of the compressor and turbine improves. The quality features of the fuel used can also be increased. In addition, after installing such a device, the crossover receives the following:
- increased engine power and speed;
- improved performance of the engine during overheating;
- more precise gear shifting in the gearbox, both in mechanical and automatic;
- fuel economy, since the consumption of fuel consumption decreases with the booster.
To improve the stability of the engine in certain modes, most motorists prefer to do engine tuning. "Mazda CX-5" at the same time receives increased torque. The owner of the vehicle, if necessary, can change the configuration of the settings at his own discretion.
Risks of using devices that increase power
As you know, manufacturers give a guarantee for the standard settings, if you make any changes to them, then you can lose it. That is why you should not rush, you should first think it over well and familiarize yourself with the installation of the chip on the Mazda CX-5 model. Tuning in this case must be done only if you are sure that it will be possible to return the factory settings.
Serious firms often offer their customers to try chip tuning for 2 weeks, if after the test the owner of the car does not like the modification, then it is redone and the money spent is returned.
If you are going to install a booster or other device on your own, then you need to follow some rules. For example, one should not chase after the maximum increase in power; an increase of no more than 25 horsepower is considered safe. Indeed, with greater power, the pressure in the combustion unit will increase, as a result of which a metal rupture may occur.
Correctly made devices that are able to change the standard parameters must be installed in a circuit with a factory electronic control unit. You can not replace the native ECU with another, since this process is irreversible.
In addition, it should be remembered that with an increase in the amount of fuel supplied, not all of it will fall into the piston, part of it settles on the particulate filter. As a result, this cleaning device will melt at high temperatures.
"Mazda CX-5" tuning: accessories
This car already has high aerodynamic performance and stylish design concepts as standard, but there is no limit to perfection. First of all, it is worth installing body kits. Such elements are used to make the Mazda body more voluminous without increasing the total mass. After their installation, the iron horse takes on a sporty look, so many owners prefer to install these styling parts on their car.
Aerodynamic bumpers for "Mazda CX-5"
The rear bumper can be upgraded to improve crash protection, improve handling and agility, and personalize the car. Fiberglass body kits are perfect for this model. You can create them yourself or use the services of the masters of the service center. First, an impression is made from the old bumper, from which a matrix is created. It is in it that fiberglass is then poured. Of course, for the manufacture of this body kit, you can use a ready-made matrix. This type of tuning allows you to mount a bumper on the Mazda, the size and type of which will be limited only by the owner's imagination.
Body kits with diffusers on the Mazda CX-5 crossover look good. Tuning with this decorative element will help visually increase the volume of the rear bumper.
But the most popular are carbon body kits. Bumpers from such material are also made according to the matrix. Their main advantages: resistance to corrosion and chemical factors. Body kits made of carbon fiber are able to distinguish the car in the traffic flow.
Mounting the grid on the radiator grille
Owners of SUVs and crossovers are often faced with a situation where the factory grille is severely damaged while driving in extreme conditions. This can be avoided by installing a special protective grid.
When buying such an accessory, preference should be given to products made of sheet iron. This tuning element has a long service life and high strength. After acquiring the mesh, you need to think carefully about how to mount it on the body of the Mazda CX-5.
You can install such an accessory in several ways:
- Remove the standard bumper, then carefully insert and fix the protective mesh into it.
- Just fix the element with wire or plastic clamps.
The latter option is not suitable, because after such work there will be knots of clamps or wires that cannot be removed. It is better to unscrew the fasteners of the body parts and remove the bumper. Then a grid of the required size and shape is cut out along it. The trimmed product is screwed to the body kit with self-tapping screws. Then the structure is put in place.
Installation of a spoiler on the car "CX-5 Mazda"
Tuning with such a detail will look complete. But mounting a spoiler is a little more difficult than mounting a bumper, since you will have to measure the distance between the wing struts. The resulting dimension is transferred to the rear edge of the car roof. Then holes for self-tapping screws are drilled.
Of course, Velcro spoilers can be purchased today, but they have a short service life and are not securely held. The spoiler is installed on the roof of the Mazda, in the cabin it is fixed with fasteners.
Performing soundproofing
Many owners of such a Mazda model complain of a strong rumble in the cabin at speeds of more than 110 km / h. That is why another type of tuning for the CX-5 is soundproofing. It takes about 6-12 hours to complete it. After laying the soundproofing materials, the car becomes heavier by 60 kg, which improves the acoustic comfort inside the car.
Refinement of the car through tinting
Another method of improving the vehicle is tinted headlights on the Mazda CX-5 model. Tuning, a photo of which can be seen in the article, helps protect the optics of the car from gravel impacts and small road debris. In addition, the film for tinting plays an aesthetic role. You can buy it at any auto shop.
Before proceeding with applying a special coating to the Mazda lights, it is necessary to decide which parts will be tinted. First you need to remove the headlight, then attach paper to it to trace the contours and cut out the workpiece. According to the finished stencil, cut the tint film.
The optical coating must be thoroughly cleaned and degreased. The tinting must be separated from the paper base, and the adhesive side should be sprinkled with pre-prepared soapy water. The headlight of the car also needs to be wetted. A film is applied to the lantern and smoothed well, moving from the middle to the edges. Air bubbles formed during operation are removed with a spatula. The excess film is folded behind the optics and the finished headlight is installed in place.
Replacement of regular disks
To improve the appearance of the Mazda CX-5, it is recommended to replace the rims with more modern and original ones. For tuning this car, products with a size of 17-19 inches are suitable. But when choosing them, you should pay attention to the company, as popular manufacturers usually offer reliable products that have a long service life. There is no need to buy discs of dubious quality, it is better to purchase products that are more expensive, but of a well-known brand, rather than cheap ones. By the way, many owners of this car do such tuning.
"Mazda CX-5" of the updated version also involves the replacement of rims, as they are the main detail of the car's exterior. In general, the improvement of the car will not only add individuality, but also give uniqueness, besides, it will emphasize all the strengths of this model.
Even the most perfect car owner is always striving to improve or add his own individual features. Tuning Mazda CX 5 may be limited to external parts - bumpers, moldings, sills, and may include a deep modernization, including intervention in the settings of the engine, brake system or suspension.
Improvement of the braking system
Tuning Mazda CX 5 2016 begins with the modernization of the brake system as needed. Regular front brake discs do not differ in great resource. Replacing discs with original ones does not solve the problem, therefore, they install high-quality products from well-known manufacturers with improved characteristics. At the same time, the calipers are being revised.
For lovers of an active driving style, Mazda CX 5 2017 tuning offers a replacement for the original brake system with a sports High Performance Brakes. This includes oversized slotted and ventilated brake discs, six-piston calipers, all-round sports brake pads and reinforced brake lines.
Such improvements allow you to effectively stop the car, especially in critical situations.
Changing engine characteristics
Chip tuning for the Mazda CX 5 remains a popular way to increase engine power. Modern engines are “smothered” by software to comply with tax requirements and environmental standards.
Tuning Mazda CX 5 to change the characteristics of the engine consists in replacing the firmware of the engine control unit, or installing an additional electronic module to correct the standard settings. Both domestic firmware and software from the best European tuning studios Piasini Engineering, CSS Performance are used. Chip tuning is also used when replacing a clogged catalyst with a flame arrester to programmatically disable the catalyst and flash it to Euro-2 environmental standards.
As a result:
- increase power and torque up to 12%;
- fuel consumption is reduced by up to 10%;
- dynamics increases significantly;
- engine idling is optimized;
- there is a stabilization of the transmission - failures disappear when shifting gears, both on the machine and on the manual box.
How is chip tuning done
Chip-tuning of the Mazda gasoline engine is carried out through the diagnostic connector, in the CX 5 it is located above the pedal assembly. We connect the computer and fill in the proprietary software. The software part takes about an hour. The process is performed in the following sequence:
- Remove the protective pad under the steering wheel;
- We connect the K-Line adapter via a USB adapter to the diagnostic connector;
- We connect the second wire to the laptop;
- We start the engine and wait for the folder with data on the engine control unit to appear on the display;
- Open the folder and install a new ECU firmware;
- We are waiting for the programmer's signal;
- Open the program and configure the engine parameters;
- After calibration, we agree with the warning about making changes and wait for the installation;
- During the firmware, the car will stall several times and start up again;
- At the end of the installation, turn off the ignition and disconnect the wires of the diagnostic connector;
- Install the cover under the steering wheel.
Risks of using devices that increase power
When intervening in a system calculated by engineers, there is always a risk of getting a different result than you expect.
Installation of a booster - a device that allows you to increase the main power indicators. An additional vehicle control unit connects to the diagnostic socket and sends signals in real time that cause the engine control unit to work according to the corrected settings.
Mazda provides a warranty on standard engine settings. By changing the program, you may lose the dealer warranty. Therefore, think again and familiarize yourself with the process of chip tuning or installing other devices on the Mazda CX 5.
Be sure to make sure that you can return the factory settings. Many serious companies now give 14-30 days to test chip tuning. And if you don't like it, during this time they will remove it for free and refund your money for it.
If you decide to install a booster or other device that allows you to increase the power of the car, you should know:
- The correct installation of the device, which changes the standard settings, is carried out in series with the native ECU. Do not allow the factory electronic unit to be removed and replaced with another one, as this process is irreversible.
- With more power, the pressure in the combustion chamber will also increase. And with changes in excess of the permissible parameters, emergency operation is possible. An increase of no more than 25 liters is considered safe. With.
- Due to the increase in the amount of fuel supplied, incomplete combustion occurs, and part of it settles on the particulate filter, which at high temperatures leads to its melting.
Mazda CX 5 tuning accessories
To change the appearance of the car, tuning accessories Mazda CX 5 are used, such as:
- LED daytime running lights;
- Chrome lining;
- Thresholds;
- Moldings and spoilers;
- Deflectors on the side windows and hood;
- Radiator grille;
- Protective mesh;
- Aerodynamic body kits;
- Wheel arch extensions.
Aerodynamic bumpers for Mazda CX-5
The Mazda CX 5 aerodynamic body kit may include: front and rear bumper skirts, door sills, grille, upper and lower spoilers, headlight cilia. These parts are designed to make the car body more voluminous, practically without increasing its weight. After installing body kits, the car acquires a more sporty appearance, which makes these styling elements more and more popular among Mazda CX 5 owners.
If you are not satisfied with the kit, there are options for separately purchasing a tuning front bumper. You can choose from both original body kits from Mazda and a kit from third-party tuning manufacturers. We recommend choosing original bumpers, as there is no need for trimming when installing them. Installation is carried out on regular places.
After you have purchased a kit of body kits, you can proceed with the installation.
Mounting the grid on the radiator grille
External tuning Mazda CX 5 is not complete without a special protective mesh for the grille. Crossover owners are familiar with extreme situations in which the radiator grille can suffer. To protect it, a mesh is installed that protects the grille from damage and the radiator from debris.
For installation, you can purchase a finished product from a tuning company or take a grid and cut it in place yourself. Depending on this, the installation of the grid on the radiator grille will differ.
The branded product is installed outside, otherwise, to install the mesh, it is necessary to remove the bumper or grille. Therefore, we unscrew the fasteners and remove the bumper, putting it on a flat surface. We try on the mesh from the inside and cut it to size. After that, we fix the mesh to the Mazda CX 5 bumper, and install the structure in place.
Installing a spoiler on a Mazda CX-5 car
The spoiler will help to get rid of the turbulence of the air currents that splatter the rear window of the car in wet weather. Mazda CX 5 with a spoiler becomes more attractive and acquires a sporty appearance. Installing a spoiler is usually somewhat more difficult. This is due to the need to very accurately measure the distance between the wing struts, and transfer the resulting size to the rear edge of the roof of the CX 5. After that, you need to drill holes into which the screws will be screwed. On sale you can find spoilers on self-adhesive mounts, but the service life of such parts is very short due to the unreliability of fastening. Other mounting options for glass glue.
Performing soundproofing
Acoustic comfort is one of the components of a good tuning Mazda CX 5. Problems with sound insulation on a car remain, but there is still no decent level of noise protection. Soundproofing is carried out, both individual elements and complex protection.
Soundproofing the hood of the Mazda CX-5. Vibration isolation Comfortmat Dark D3 is applied to the metal of the hood, and PPU or PPE sound insulation on top of the standard insulation is applied on top. After assembly, the soundproofing sheet is between the hood and the standard thermal insulation.
Roof soundproofing. Everything is dismantled: rack linings, visors, ceiling lamps. Then the lining is removed.
We carry out degreasing of the roof surface. We put a unique vibration-absorbing material with effective properties. Then the second layer - Biplast Premium 15 mm thick.
We collect the ceiling back.
Floor soundproofing. Remove the seats, front panel and floor covering. We roll up the first layer of vibration isolator. We apply Bimast Bombs on the wheel arches. The second layer on the floor is SPLEN. We overlap the material so that the total thickness is 8 mm. We process the arches Biplast Premium by 15 mm. The third layer on the floor will be a heavy NoiseBlock sound insulator in the amount of several cut sheets. We collect the salon.
Soundproofing doors. The speakers of the audio system are located in the doors, so special attention should be paid to soundproofing this part of the car. Remove door panels. We hang out the glass and remove the plastic shield on which the wires are fixed. On the inner metal surface, with the first layer, we glue the vibration isolation material 2 mm. The second layer is laid with sound and heat insulating material Smart Flex based on foamed rubber. The material is moisture resistant, which is important in the door, where moisture accumulates. Reinstall the plastic shield. And we isolate the door trim from the inside with a 15 mm Biplast Premium sound absorber, which also eliminates squeaks.
Using the same materials and technology, we glue the rest of the car. Complete soundproofing operations for the Mazda CX 5 in specialized centers are carried out in a few hours.
Refinement of the car through tinting
One of the most popular tuning measures, not only in terms of performance, but also the appearance of the Mazda CX-5, is window tinting and armoring.
Tinting contributes to the comfort in the cabin and protection from sunlight. The dimming of the glasses ensures the safety of things left in the cabin.
Tinting can be sprayed, film tinted or removable tinted.
Covering the glass with a film will become an element of passive safety, ensuring its strength. If the glass breaks, then the fragments will remain on the adhesive side of the tinting, which will save you from the difficult removal of small glasses from the car interior.
Car service specialists offer to tint the rear of the crossover or any other glass using colored, athermal and metallized films from the manufacturers Suntek, LLumar, ASWF, as well as cover the glass with armor films of any company on our market.
On the CX-5, the front windows are already slightly tinted from the factory and give off a greenish tint, but this is not enough.
Another tuning Mazda CX 5 is optics tinting. The tint film plays not only an aesthetic, but also a protective role, helping to protect the headlights from mechanical damage. With a strong impact, tinting will not allow the glass of the optics to crumble along the road and will reliably hold the fragments.
When choosing a tint film, please note that the higher the quality of the product, the higher its price will be. After you have bought the film, you need to decide which parts of the headlight you want to tint. To do this, you must completely remove the Mazda CX 5 headlight and attach paper. Outline and cut out the paper pattern. According to the resulting stencil, we cut out the film itself. After that, clean and degrease the headlight cover. Then we separate the tinting from the paper base and spray its adhesive side with soapy water. You will also need to wet the Mazda CX 5 optics. Gently apply the film to the headlight and begin to smooth it, moving from the center of the lantern to its edges. If you still have air bubbles under the film, you will need to expel them with a spatula. At the end, the excess parts of the film are bent behind the headlight, and the finished optics are installed in place.
Replacement of regular disks
The last way to give the car individuality is to replace the standard wheels with products from tuning companies. With their help, you can significantly transform the appearance of the car, spending very little of your time. For installation on the Mazda CX 5, wheels of dimensions from 17 to 19 inches from almost all well-known manufacturers are suitable.
The main thing is not to buy the products of Chinese companies in any case. It is better to pay extra and buy a set of disks from companies such as BBS, Borbet or Alcasta.
After purchasing the parts, you can go to the nearest tire fitting. We categorically do not advise you to change discs yourself, because without specialized equipment, expensive accessories can be damaged.
In conclusion, I would like to note that in an effort to improve the Mazda CX 5, there is nothing shameful. All new models are created in the same way. But, if you are not ready to take risks and subsequently invest in the repair of your car, start with external tuning. And postpone intervention in internal systems until you fully understand and understand the need for deep modernization.
This section presents the external . The photo above shows products that you can purchase in our store website if you want to do tuning Mazda CX-5 (Mazda CX-5) 2015. Look at the various equipment options, take a look at what you like best and if you have any questions about how to make tuning better, then call or write to our specialists.
Accessories Mazda CX-5, Mazda CX-5 2015.
Accessories Mazda CX-5 (Mazda CX-5) 2015 are made by various manufacturers, and all of them are designed to be easily installed on a car. The list of manufactured additional equipment is varied, and accessories Mazda CX-5 (Mazda CX-5) 2015 complement both the appearance of the car and practically useful functions.
Crankcase protection Mazda CX-5, Mazda CX-5 2015.
Reliably protect from damage to parts of the car. It is made so that in addition to the engine crankcase, it protects the gearbox and transfer case. Crankcase Mazda CX-5 (Mazda CX-5) 2015 made from various materials. In production, steel (from 1.5 to 2.5 mm), aluminum (4 mm), composite (10 mm) can be used. In addition to some car models, the gas tank and radiator are protected.
Tow bar Mazda CX-5, Mazda CX-5 2015.
It is intended for transportation of trailers, for installation of a luggage carrier for bicycles. Towbar Mazda CX-5 (Mazda CX-5) 2015 There are several types, with various options for attaching hooks. Towbars with quick-release hooks are popular, they have maximum load characteristics and are easy to handle. In some cases, it is necessary to make a cutout in the bumper, but almost always it is invisible. Also, the towbar allows you to protect the rear bumper in case of collisions with an obstacle.
Mats Mazda CX-5, Mazda CX-5 2015.
Mats Mazda CX-5 (Mazda CX-5) 2015 protect the interior from dirt. Now the sale is dominated by polyurethane mats. Floor mats Mazda CX-5 (Mazda CX-5) 2015, made of this material, they are odorless, their sides are about three centimeters, they do not allow dirt and water to get outside the rug. The trunk mat is also made of polyurethane, it will protect the pile cover of the luggage compartment from accidental damage.
Deflectors Mazda CX-5, Mazda CX-5 2015.
They have several practical useful features. They are made of strong plastic. Mostly have a darkened translucent color. Deflectors Mazda CX-5 (Mazda CX-5) 2015 on the glass will protect from rain drops entering the cabin. The hood deflector will reliably protect the hood from the formation of chipped paintwork. Glass deflectors differ in the ways of fastening: they are glued on the outside with adhesive tape, or they are inserted into the glass frame. The hood deflector is mounted without drilling holes in regular places.
Body kit, side skirts Mazda CX-5, Mazda CX-5 2015.
One of our activities is stainless steel products or. All products are manufactured on professional technological equipment. The kit always comes with a mounting kit necessary to install body kit Mazda CX-5 (Mazda CX-5) 2015. The range of body kit includes bumper protection (rear and front), corner bumper protection, sills or footpegs. Installing a body kit in a car service or on your own is not difficult.
Bumper protection Mazda CX-5, Mazda CX-5 2015.
It is a product of one or more pipes of different diameters. It helps to protect the bumper from damage. Bumper protection Mazda CX-5 (Mazda CX-5) 2015 also gives the car a harmonious look.
Thresholds Mazda CX-5, Mazda CX-5 2015.
Designed for ease of getting into the car. They also limit the dirt flying from the front wheels to the car body. Thresholds Mazda CX-5 (Mazda CX-5) 2015 are made by various manufacturers, all of good quality, installed in the regular places of the car. There are no fundamental differences in the mounts. The main difference is the design and the material from which they are made. Thresholds made of aluminum profiles have a more diverse and attractive design. Thresholds made of stainless pipe and aluminum sheet on top are a classic and reliable option. There are no differences in the reliability of these two thresholds.
For all questions, call or write to us. We will help you choose the best tuning options and accessories for your car.
Repair of dents without painting in Moscow SWAD